PCM91 : PCM91 General Questions
Question:I would like to store registers from my PCM91 onto a PCMCIA card. Where can I purchase one? | |||||||||||||||||||||
Answer:Ordering blank PCMCIA SRAM Cards for PCM91Following is some basic information on how and where to order blank PCMCIA (also called PC) Cards for the Lexicon PCM91 Digital Effects Processor. The PCM91 was designed to address <1 Mbyte SRAM PC cards for storing Register Banks (or user memory banks) of sounds as well as complete Setups (system configurations in control mode). The chart below gives you an idea of how many programs can be stored on different card sizes:
Additional Technical Info: Note that the PCM90 will accept 2MB SRAM cards but will format them as if they are 1 MB. Access time for these cards is 250nsec or faster. The PCM91 can use either 8-bit or 8/16-bit bus configuration. Attribute memory can be present, but is not used. Please consult Page 1-8 of the Owner’s Manual for additional information. PCMCIA Card Vendors Digikey Centennial |
Need more info? Check out the following links:
